This larger dual pallet front loader can handle parts loaded vertically or horizontally in pallets, with vertical arrangements offering larger part quantities per pallet. High part queue capability - potential for a complete 1 or 2 shift queue depending on cycle time. Continuous machining cycle w/ dual pallet input - operator can reload one pallet as robot continues to load/unload parts from the other pallet. Pallets are on slides and need to be removed only when changing pallets for another job. Easy access to machine tool through sliding door with machine tool controls always accessible, even when in automatic operation.

View Configuration Options
 Watch Video
Get Automation Estimate
 
  • Can be easily accommodated to load/unload virtually any machine tool – lathes, mill, grinders, EDMs, etc.
  • Handles all spindles up to a 20” operator reach, and from 30” to 45” high
  • Works with left hand (L) or right hand (R) controls on machine tool
  • FANUC M-20iA or M-10iA Robot for small to medium sized parts. Robot capacity is 44 or 22 lbs respectively including end effector
  • Cells designed to require minimal floor space but still allow access to the front of the machine tool - no sliding equipment away to service machine tool. Safety interlocked guarding door allows complete access to machine tool or automation cell
  • Robot collision guard software option
  • Safety guarding around robot cell – meets RIA & OSHA Safety Standards
  • Standard dual pallet input/output solution is included in base system cost.  Various alternative input/output solutions available upon request. (conveyors, gravity chutes, bowl feeders, etc.)
  • Parts can be vertical or horizontal in pallets, with vertical arrangements offering larger part quantities per pallet
  • Single gripper (EOAT) is provided with blank gripper jaws - see "OPTIONS" for different configurations
  • Continuous machining cycle w/ dual pallet input - operator can reload one pallet as robot continues to load/unload parts from the other pallet
  • Complete access to machine tool control panel while in automatic operation
  • User-friendly programming with the FANUC robot
  • Easy to adapt for different work pieces
  • Cell is reusable & reprogrammable for alternative applications
  • Cell is assembled, programmed, and tested before delivery using generic pallets, parts, and EOAT
  • Guaranteed JH Robotics & FANUC support
  • Operator training and runoff at JH Robotics included in price
  • Various alternative input/output solutions available upon request. (conveyors, gravity chutes, bowl feeders, etc.)
  • Cells are designed and constructed to best suit the customer’s need, i.e. queue time, floor space, part size & weight versus robot model, various optional inputs, etc.
  • Turnkey automation for your parts (suggested for first time purchasers) - NO metal cutting unless by seperate order
  • Two (2) 250 part capacity 28” x 24” size pallets, 1 for input and 1 for output, or both for input and output (up to 500, 1” diameter parts in vertical position)
  • Heavy duty slide out pallets with MTL-500 setups – pallets are loaded/unloaded when pulled out – pallets interchange only for part change or for storage of parts
  • Hydraulic cart with MTL-500 setups instead of slide out pallets – pallets can be lifted onto cart should it be desired to exchange pallets with or without parts
  • Dual gripper (EOAT) for simultaneous load/unload
  • Dual linear 2-jaw assembly for gripping parts on the diameter – parts horizontal in pallets
  • Dual 3-jaw assembly for gripping parts on end – parts vertical in pallets
  • Dual rotating gripper for reversing parts to machine the opposite end
  • Can accommodate secondary operations based on cycle times such as washing, inspecting/gauging, deburring, component assembly, labeling or vision systems
  • A light tower for the cell

 

Copyright © - JH Robotics, Inc.

Scroll to Top